Software Development Kit (SDK)

Software Development Kit for the BioRadio^® 150
(BioCapture™, BioCapture™ Pro and CleveLabs™ Systems)

The Software Development Kit ('SDK'), now available for use with the BioRadio 150 in the BioCapture, BioCapture Pro and CleveLabs systems, greatly increases flexibility for research applications. Using the SDK, you can design any software interface around these systems.

The SDK will allow you to write custom National Instruments LabVIEW™, MathWorks MATLAB^® or 32-bit Windows applications to display and analyze data in real-time. Additionally, the integration of system hardware, LabVIEW or MATLAB drivers, and LabVIEW or MATLAB allows real-time control of other devices (e.g. EMG sampled by BioRadio 150 could be processed and used to control a robotic arm in real-time).

The SDK includes Win 32 dynamic link libraries ('DLL') and drivers designed to operate with software written in LabVIEW 7.1 or newer and MATLAB 6.5 (R13) or newer. The SDK also includes function documentation, sample code and a User's Guide.

SDK for the BioRadio 150 - System Requirements

Before downloading the SDK for the BioRadio, you must first verify that your BioRadio is utilizing the most up-to-date firmware. To do this, launch your Capture Lite software (with the BioRadio connected and switched ON), and click Config. If the Configuration Wizard does not list Accelerometer and SpO₂ input channels, then your BioRadio's firmware must be updated before using this version of the SDK. Please contact CleveMed to upgrade your firmware before using the drivers.

To use LabVIEW and MATLAB SDKs, LabVIEW 7.1 or higher or MATLAB 6.5 (R13) or higher is required

DOWNLOAD SDK for BioRadio (zip, 2.80 MB)