CleveLabs™ BioRadio™

BioRadio™ 150

The CleveLabs™ Laboratory Course System includes the BioRadio™ 150, a compact wireless programmable monitor for viewing and recording physiological signals. A total of 14 channels are available including 8 programmable channels and 6 pre-configured inputs. The programmable inputs allow for any combination of physiological signals to be recorded, including electrical activity of the heart, brain and muscle. Transducers can also be used to measure blood pressure, respiration, force and more. Two AA batteries power the BioRadio, providing approximately 10 hours of continuous use.

BioRadio™ 150
Embedded Transducers

Pressure Based Airflow
Using a plastic cannula, airflow and snore can be measured
Pulse Oximetry
Pulse rate and blood oxygen saturation are measured using the finger clip sensor.
Accelerometry & Body Positioning
Provides motion data within +/- 2G. When worn by the subject, body position can also be derived.
DC Auxillary Input
Accepts additional external transducers.

Full BioRadio™ Technical Specifications >>>

BioRadio™ Accessories

Available Transducers
Blood Pressure CuffManual cuff that measures systolic & diastolic blood pressure Breadboard KitIncludes a breadboard, battery, resistors, capacitor & op-amps to design custom circuits Force PlateMeasures force during stepping or jumping Galvanic Skin Response Galvanic Skin Response is measured through the finger Hand DynamometerStrain-gage isometric dynamometer that measures grip strength Nasal/Oral Airflow CannulaPlastic tubing that measures airflow from the nose & mouth through changes in pressure Nasal/Oral ThermocoupleMeasures airflow from the nose & mouth through changes in temperature

Pulse Oximeter Finger SensorFlexible sensor for measuring blood oxygen saturation & pulse rate Pulse Oximeter InterfaceRequired for use with the Pulse Oximeter Respiratory Effort BeltMeasures respiratory effort through chest or abdominal expansion & contraction Skin Temperature SensorMeasures surface skin temperature SpirometerMeasures flow rate & lung volume Transducer Interface CableRequired to interface certain sensors with the BioRadio

For More Information

about the CleveLabs Laboratory Course System

please contact the CleveMed Sales Department

Toll-free: 877.CleveMed (877.253.8363), ext. 1306
Tel: 216.791.6720, ext. 1306

Inquiries from Canada , please contact

AYVA Educational Solutions, Ltd.
4305 Fairview St., Suite 340, Burlington, ON L7L 6E8
Tel: 1-877-967-2726
clevelabs@ayva.ca | www.ayva.ca

This device is intended for scientific and research purposes only. IRB approval must be obtained before using this device in human testing.

Sale of this product outside of the United States is subject to the rules and regulations of each individual country.

BioRadio is a registered trademark of Cleveland Medical Devices Inc.

CleveLabs is a trademark of Cleveland Medical Devices Inc.

MATLAB is a registered trademark of The MathWorks, Inc. LabVIEW is a trademark of National Instruments Corporation.

Name*
Email*
	(Re-enter Email for verification*)
State*	Ph:
Question/Comment:
Subscribe to mailing list